Louder, more bass, surround sound or MP3 capability.  Nowadays stereo components in cars have grown over the years.  That means we had to make adjustments to our cars to support these new stereo technologies.  We want them in our cars.  It’s not always easy though to put them there.

Well discuss now how to do a Ford radio install.

To start with the owning the following tools:

Screw driver, Panel tools, Pick tools, Drop light, Wire ties, Crimpers, Electrical tape, Drop cloths, Wire cutters

Safety Measure: The first thing that you want to do before doing any kind of electrical work on a car is to disconnect the car battery.  Once that battery is disconnected we can get started.

With the battery disconnected you can now start by dissembling the speakers that are already installed in the car.  Use the car manual to do this.  If you do not have a car manual try contacting the manufacturer for assistance.

1. Uninstall the old factory speakers.

2. Use the wires for the cigarette lighter for a power source for the Ford radio installation.

3. Turn the ignition on and then select the wire that is under the dash.

4. Put the light tester into the ignition source. Light should come on.

5. You will then need to look for the electrical lead that is coming from your radio. This lead powers one of the stereos. You will then wrap the lead with electric tape so that it does not touch the metal surface.

That should do it. Your Ford radio install should be complete.